ChangZhou PUENSHI Intelligent Equipment Co., Ltd - Professional IV Solution production Designer and Manufacturer

1、Project Description：

In order to meet the production requirements, the equipment has a series of stations, including: bag station, filling& nitrogen station, transfer station, sealing station, output station etc. It;s compatible with the agreed Triple-chamber bags specifications. The whole equipment is covered in the 100-class ORABS+Glove Box, and the soft bag should have a corresponding buffer zone when entering the equipment. When the equipment is running, the protective door cannot be opened, and the worker performs related operations through the glove box.The equipment uses 3E+H mass flowmeters in accordance with GMP and FDA requirements. The equipment comes with CIP/SIP components and related control procedures.

Touch screen control, complete functions, with a complete alarm system, can quickly locate the fault point. For detailed equipment functions, see "5. equipment Information" Material of product contact parts are in stainless steel SUS 316L, with internal surface. Non-contact parts are in stainless steel SUS 304, And medical silicone rubber .HPLC/IHM System in Chinese and English Language.

Especially suitable for medical products. The high transparent polycarbonate safety door and viewing window comply with health and safety regulations and facilitate the monitoring of the operating status of the equipment.

Technical parameter

Equipment Model	PNS-T1
Specification	Filling-sealing Trippple Chamber bag
Production capacity	400BPH
Production capacity	Affected by worker proficiency, filling capacity, filling pressure, compressed air, etc
Equipment Dimension Approximately	Length 2.8m；Width 1.6m Height 2.6m Approximately（The final drawing shall be subject to the drawings attached to the contract）
Power source	220V，MAX.8KW
Air Compressor	Dry oil-free compressed air. 0.65-0.8Mpa,800L/min
Filling	Filling liquid pressure 0.4-0.6Mpa，Filling Liquid Temperature≤80℃，Filling Accuracy±1%
The use of Environment:	20-35℃，Air humidity 40%-60%，Environment without strong electromagnetic interference
Remarks: Production speed is affected by factors such as worker proficiency, filling capacity, filling pressure, compressed air, nitrogen filling process, Bag specifications etc